What Suspension Are You Using?

[boden autohaus]

What's going on guys? We've noticed there's a lack of suspension discussion here on H-Talk and we'd like to change that! What's everybody using?

Here is our shop LP610-4, LamBoden, that is utilizing air ride suspension with AccuAir e-Level management. This is the first Huracan in the USA on air ride. We retained the OEM struts and EDC so it rides like stock and allows us to still choose the different driving modes!

Post up your pics and details!

[boden autohaus]

We had the pleasure of putting Novitec lowering springs on for this client. Being that these are adjustable with the OEM coilovers this is a great setup for anyone looking to get that ideal drop for your desired look and local road conditions.

[boden autohaus]

Another one in for Novitec springs. Looking mean!

[D11]

Have you guys had any issues with the Novitec Springs on mag ride H’s. My H is sold but my Performante arrives any day now and I have an interest in lowering but I’m hesitant? Any feedback is much appreciated.

[flyby_91]

Do not do it.
The Performante has a suspension that is calibrated pretty well. You will be going backwards if you decide to lower it.

[Sattman]

I am in the same situation. I sold the H and took the KW's off. I finally test drove the HP and the ride felt so much better than my H with the KW's. I spoke to the service tech and he said the HP spring rate is much different than the KW's. so for now when i get the HP i will drive it as is and see if i can handle the wheel gap. i don't want to sacrifice the ride.

[flyby_91]

At least with the KW system you are using a different strut which is matched to the spring rates.
On the Novitec setup you will use the OEM strut with a shorter spring. This fine if you want to lower a regular H because the ride quality and handling is very close to OEM.
But doing this on the Performante it will be step back.

[RedGTS]

At least with the KW system you are using a different strut which is matched to the spring rates.
On the Novitec setup you will use the OEM strut with a shorter spring. This fine if you want to lower a regular H because the ride quality and handling is very close to OEM.
But doing this on the Performante it will be step back.

He may be talking about the Novitec setup as it is made by KW.

Sent from my XT1650 using Tapatalk

[Sattman]

He may be talking about the Novitec setup as it is made by KW.

Sent from my XT1650 using Tapatalk

That is correct.

[flyby_91]

I stand corrected.

KW does make a suspension for the 2017 and up R8 and if the Huracan has no front lift option the R8 suspension will bolt right on.