Please help swapping the Novitec springs.

[Tri Nguyen]

Hello everyone,hope all is well.
Today I removed all my suspensions off the car. I got the upper strut hat loose but I could not remove the black and white harness,(terminals) seperated from the plug. I removed the purple clip inside the plug but couldn't pull out the black and white harness.
Can I cut the harness then soldering the harness nicely after installed new springs? Does it affects anything?
Please any help would be greatly appreciated

[Ferruccio]

Hello everyone,hope all is well.
Today I removed all my suspensions off the car. I got the upper strut hat loose but I could not remove the black and white harness,(terminals) seperated from the plug. I removed the purple clip inside the plug but couldn't pull out the black and white harness.
Can I cut the harness then soldering the harness nicely after installed new springs? Does it affects anything?
Please any help would be greatly appreciated

Novitec includes a special tool for removing that I believe. I did not do the install myself but had read the instructions and seen the tool and this sounds like what you may be referring too. Hope that helps...

[Tri Nguyen]

Thanks for the reply buddy. I was refer to how to de pin those two black and white terminals. So I can able to slice out the upper hat. I got the suspension all done that night.